How To Hang Drywall For Smooth Walls

If you’re trying to spiff up your office or home, hanging drywall is a great way to do it. Whether you want your walls to look more professional or simply want to have more options in terms of painting and decoration, drywall could help you create the space of your dreams. However, if you’re considering doing the job yourself, you’re going to need a few tips in order to make sure you do the job right. Even if you’re new to home improvement, working alongside a helpful company like Sheetrock Repair Sandy UT, you’ll be enjoying your new drywall in no time. Here are a few tips to consider before you hang.

Know Where the Studs Are

Before hanging drywall, you need to be absolutely sure that your surface is primed and ready. Part of this process involves finding the studs in your wall. These are metal parts that hold your wall’s beams in place. It’s crucial that you know the location of your studs beforehand since you never want to drill directly in line with one unless you want to risk seriously damaging your wall. Feeling for studs isn’t difficult. If you have a stud finder, you can easily to a sweep of your wall first. If you not, you can find this tool at a local hardware store.

Be Aware of Stud Centers

Once you’ve found the studs, you’re ready to put your drywall in place. But before you start doing any of the dirty work, you should make a note of where the center of each stud is. This will help you create a safe, even hang. Using chalk and your stud finder, mark on your wall where the center of each stud sits. This will create a good visual reference and make hanging your drywall that much easier.

Make Sure Everything is Smooth

Remember, because you’re hanging your drywall, you need everything to be on an even plane. Even if a stud is protruding a little bit, it could knock you out of balance and send everything crashing down. Part of getting acquainted with your studs is running your hand along the wall first and tapping your hammer to feel for any uneven areas where studs might be poking out. Try to smooth everything down if you can. If you don’t have a flat surface before beginning, your project will be doomed from the start and you’ll probably have to begin again, so try to take your time during this step.

Use the Right Screws

You might not think it matters too much what screws you use, but think again. For drywall, you need a specific type of screw that’s a certain size and shape. Drywall screws are called coarse-thread screws, and they need to be longer so that they’ll actually hold your drywall in place without anything breaking or buckling. Depending on the thickness of your drywall, you’ll need to get screws in specific measurements. If you’re not sure about this, check with someone at your local hardware store.